Skip to main content
Learning LoftInstitute

Mathematics

Estimation Practice Questions: Is Your Estimate Too Big or Too Small?

Twelve estimation questions rounded to one significant figure, each worked against the exact value so you can see whether the estimate lands high or low.

The short answer

Estimating means rounding each number to one significant figure and doing that easier calculation. For 38 × 21, round to 40 × 20 = 800. The exact value is 798, so the estimate is 2 too high. Rounding a factor up, or a divisor down, always pushes an estimate above the true answer.

The questions

  1. Question 1Foundation3 marks

    Estimate 38 × 21 by rounding each number to 1 significant figure. Then work out the exact value and say whether the estimate is too big or too small.

    Show the working

    Estimate 800; exact 798; a slight over-estimate

    1. 38 rounds to 40 and 21 rounds to 20.
    2. 40 × 20 = 800.
    3. Exact: 38 × 21 = 798.
    4. Raising 38 to 40 adds 2 × 21 = 42; lowering 21 to 20 removes 40 × 1 = 40.
    5. Net effect +2, so the estimate is 2 above the true value.
  2. Question 2Foundation3 marks

    Estimate 612 ÷ 29 by rounding to 1 significant figure, and state whether your estimate is above or below the exact answer.

    Show the working

    Estimate 20; exact 21.1 (1 d.p.); an under-estimate

    1. 612 rounds to 600 and 29 rounds to 30.
    2. 600 ÷ 30 = 20.
    3. Exact: 612 ÷ 29 = 21.103…
    4. The number being divided was rounded down and the divisor was rounded up.
    5. Both changes make a quotient smaller, so 20 must be below the true value.
  3. Question 3Foundation3 marks

    Estimate 4.8 × 7.2 to 1 significant figure, then find the exact product and the size of the error.

    Show the working

    Estimate 35; exact 34.56; over-estimate by 0.44

    1. 4.8 rounds to 5 and 7.2 rounds to 7.
    2. 5 × 7 = 35.
    3. Exact: 4.8 × 7.2 = 34.56.
    4. Raising 4.8 to 5 adds 0.2 × 7.2 = 1.44; lowering 7.2 to 7 removes 5 × 0.2 = 1.00.
    5. 1.44 − 1.00 = 0.44, and 34.56 + 0.44 = 35.
  4. Question 4Foundation2 marks

    Estimate 9.7 + 12.4 + 5.6 by rounding each number to 1 significant figure. Is the estimate high or low?

    Show the working

    Estimate 26; exact 27.7; an under-estimate by 1.7

    1. 9.7 → 10, 12.4 → 10, 5.6 → 6.
    2. 10 + 10 + 6 = 26.
    3. Exact: 9.7 + 12.4 + 5.6 = 27.7.
    4. 12.4 lost 2.4 in the rounding, while 9.7 and 5.6 gained only 0.3 and 0.4.
    5. −2.4 + 0.3 + 0.4 = −1.7, so the estimate is 1.7 low.
  5. Question 5Core3 marks

    Estimate (58 × 31) ÷ 19.

    Show the working

    Estimate 90; exact 94.6 (1 d.p.); an under-estimate

    1. 58 → 60, 31 → 30, 19 → 20.
    2. (60 × 30) ÷ 20 = 1800 ÷ 20 = 90.
    3. Exact: 58 × 31 = 1798, and 1798 ÷ 19 = 94.63…
    4. Rounding the divisor 19 up to 20 on its own drops the value to 1798 ÷ 20 = 89.9.
    5. Raising 58 to 60 does not recover that loss, so 90 sits below the true value.
  6. Question 6Core3 marks

    Estimate 0.38 × 812 and state the error.

    Show the working

    Estimate 320; exact 308.56; over-estimate by 11.44

    1. The first significant figure of 0.38 is the 3, so 0.38 rounds to 0.4.
    2. 812 rounds to 800.
    3. 0.4 × 800 = 320.
    4. Exact: 0.38 × 812 = 308.56.
    5. Raising 0.38 by 0.02 adds 0.02 × 812 = 16.24; dropping 12 from 812 removes 0.4 × 12 = 4.80. Net +11.44.
  7. Question 7Core4 marks

    A theatre sells 412 tickets at PKR 1,850 each. Estimate the takings, then say whether the estimate is above or below the true figure.

    Show the working

    Estimate PKR 800,000; exact PKR 762,200; an over-estimate

    1. 412 rounds to 400 and 1,850 rounds to 2,000.
    2. 400 × 2,000 = 800,000.
    3. Exact: 412 × 1,850 = 762,200.
    4. The price was rounded up by PKR 150 on every one of the 412 tickets, adding PKR 61,800.
    5. Dropping 12 tickets removes only PKR 24,000, so the estimate finishes PKR 37,800 too high.
  8. Question 8Core3 marks

    Estimate 19.6 ÷ 0.42.

    Show the working

    Estimate 50; exact 46.67 (2 d.p.); an over-estimate

    1. 19.6 rounds to 20 and 0.42 rounds to 0.4.
    2. 20 ÷ 0.4 = 50, because 0.4 fits into 20 fifty times.
    3. Exact: 19.6 ÷ 0.42 = 46.666…
    4. The number being divided went up and the divisor went down.
    5. Both push a quotient upwards, so 50 is above the true value.
  9. Question 9Stretch4 marks

    A car covers 187 miles on 4.3 gallons of petrol. Estimate the miles per gallon, and decide before checking whether the estimate is high or low.

    Show the working

    Estimate 50 mpg; exact 43.5 mpg (1 d.p.); an over-estimate

    1. 187 rounds to 200 and 4.3 rounds to 4.
    2. Numerator up, divisor down, so the estimate must be high.
    3. 200 ÷ 4 = 50 mpg.
    4. Exact: 187 ÷ 4.3 = 43.488…
    5. The estimate is about 6.5 mpg generous — enough to strand you if you planned a journey on it.
  10. Question 10Stretch4 marks

    Estimate (0.052 × 396) ÷ 0.021.

    Show the working

    Estimate 1000; exact 980.6 (1 d.p.); an over-estimate

    1. 0.052 → 0.05, 396 → 400, 0.021 → 0.02.
    2. 0.05 × 400 = 20, and 20 ÷ 0.02 = 1000.
    3. Exact: 0.052 × 396 = 20.592, and 20.592 ÷ 0.021 = 980.571…
    4. Two of the three roundings push upwards: 396 raised, and the divisor 0.021 lowered.
    5. Only 0.052 → 0.05 pushes down, so the estimate ends above the true value.
  11. Question 11Stretch4 marks

    A rectangle measures 8.6 cm by 3.4 cm. Estimate its area to 1 significant figure and state the error.

    Show the working

    Estimate 27 cm²; exact 29.24 cm²; under-estimate by 2.24 cm²

    1. 8.6 rounds to 9 and 3.4 rounds to 3.
    2. 9 × 3 = 27 cm².
    3. Exact: 8.6 × 3.4 = 29.24 cm².
    4. Raising 8.6 to 9 adds 0.4 × 3.4 = 1.36; lowering 3.4 to 3 removes 9 × 0.4 = 3.60.
    5. 1.36 − 3.60 = −2.24, so the estimate is 2.24 cm² low.
  12. Question 12Stretch4 marks

    Without calculating anything, say whether rounding to 1 significant figure will make 703 ÷ 0.68 come out too big or too small. Then estimate, and check.

    Show the working

    Too small; estimate 1000; exact 1033.8 (1 d.p.)

    1. 703 rounds down to 700; 0.68 rounds up to 0.7.
    2. A smaller number divided by a larger divisor gives a smaller answer, so the estimate will be low.
    3. 700 ÷ 0.7 = 1000.
    4. Exact: 703 ÷ 0.68 = 1033.82…
    5. The prediction was correct before any of the division was carried out.

Where these go wrong

  • Rounding 0.052 to 0.1 or to 0.0 by counting decimal places instead of significant figures, which puts the estimate out by a factor of ten.
  • Predicting an over-estimate whenever numbers are rounded up, forgetting that rounding a divisor up makes the answer smaller.
  • Working out the exact answer on a calculator and then rounding it, which answers a different question and shows in the working.
  • Rounding to two significant figures because it feels more accurate, leaving a calculation like 610 ÷ 29 that still cannot be done mentally.
  • Rounding 4.8 × 7.2 to 5 × 7 correctly but then writing 35 as the exact answer as well.

One significant figure is not one decimal place

The first significant figure of a number is its first non-zero digit, wherever that digit happens to sit. In 812 it is the 8, so 812 becomes 800. In 0.052 it is the 5, so 0.052 becomes 0.05 — not 0.1, and not 0.0. Small decimals are where this goes wrong most often, and when it does the rounded number is out by a factor of ten before any arithmetic has started.

The test of whether you have rounded correctly is whether the calculation is now doable in your head. 600 ÷ 30 is a mental step. 612 ÷ 29 is not. If the rounded version still needs a calculator, you have not rounded far enough.

You can say whether the estimate is high or low before you check

Every rounding either raises a number or lowers it, and each of those moves the answer in a direction you can name in advance. That is what separates an estimate from a guess — it comes with a known lean.

Two of them cover division, and they are the ones pupils get backwards. A larger divisor makes an answer smaller, so rounding 29 up to 30 pushes 612 ÷ 29 down. Say that sentence once and the rule stops needing to be memorised.

  • Round a number you are multiplying up, and the estimate goes up.
  • Round a number you are multiplying down, and the estimate goes down.
  • Round the number being divided up, and the estimate goes up.
  • Round the divisor up, and the estimate goes down. Round the divisor down, and the estimate goes up.

When the two roundings pull opposite ways

If both roundings push the same way the answer is certain. 19.6 ÷ 0.42 became 20 ÷ 0.4 — numerator up, divisor down — so 50 has to be too big, and it is: the true value is 46.67 to two decimal places.

When they disagree you have to compare their sizes, and that comparison is quick. In 38 × 21 → 40 × 20, raising 38 to 40 adds 2 × 21 = 42, while dropping 21 to 20 removes 40 × 1 = 40. The gain wins by 2, which is exactly the error in the estimate.

This is also the honest answer to "why not just use the calculator". The estimate is what tells you the calculator answer is plausible. Working out the exact value first and then rounding it answers a different question, and it shows: an "estimate" of 798 for 38 × 21 gives away that the full multiplication was done.

Common questions

What does rounding 0.048 to 1 significant figure give?

0.05. The first significant figure is the first non-zero digit, which is the 4 in the hundredths place, and the 8 after it rounds that 4 up to 5. Answers of 0.0 and 0.1 both come from counting decimal places instead, and both are out by a factor of ten or more.

Can an estimate ever come out exactly right?

Yes, when one rounding gains as much as another loses. It is coincidence rather than a sign of good technique, and it does not license using the estimate as the exact answer. If a question asks for both, the exact working still has to be shown separately.

My child gets the estimate right but the exact answer wrong. Is that a problem?

It is a useful diagnosis rather than a worry. A correct estimate shows the size of the answer is understood, so the marks are being lost in the written method — a misaligned column, a dropped carry, a decimal point in the wrong place. Those are far quicker to fix than missing number sense.

How close does an estimate have to be to count as correct?

There is no percentage tolerance to hit. Credit goes to the method: round each number to one significant figure, then carry out that calculation correctly. An estimate of 800 for 38 × 21 does the job; 798 does not, because it shows the full multiplication was done and then relabelled.

Last updated

Got the answer but not sure why?

That gap is the one worth closing before the exam. A tutor can watch a student work through these live and see where it goes wrong.

optional
optional
Subjects

Pick everything you want covered

Class format
optional
optional

The more specific you are, the better we can match a tutor.

WhatsApp us